Home/Recipes/Chapter 7 — Equipment and vessel notes
Back to Recipe Intelligence Library
Authoritative Commercial Catering Reference

Chapter 7 — Equipment and vessel notes

Standardized Commercial ProceduresBanquet Scaling & Safety NormsFSSAI Hygiene Standards

The recipes assume a working bulk kitchen: large vessels, a reliable heat source, a tandoor or a large griddle where the dish needs one, and enough service vessels to hold each dish separately. This chapter states what each dish type needs at 50, 100 and 500 portions, and what must be batched rather than cooked in one vessel.

Vessel sizes — the 50-portion rule

One 50-portion vessel is the standard unit in this book. The table below gives the working size for each dish type at each scale. “Vessel” means the cooking vessel; service vessels are separate (see Chapter 8).

Dish type50 portions100 portions500 portions
Rice / biryani / pulaoOne large vessel (about 30 L)Two 50-portion vesselsTen 50-portion vessels, in sequence
Gravy / curry / dalOne large vessel (about 25 L)Two 50-portion vesselsTen 50-portion vessels, in sequence
Dosa / uttapam / parotta (griddle)Two large griddles, live counterThree griddles, or two countersFour or more counters; never one griddle
Poori / bhature / vada (frying)One large kadai, fried in batchesTwo kadais, fried in batchesFrying station, two or more kadais
Tandoor breads and kebabsOne tandoor, one cookOne tandoor, two cooks, staggeredTwo tandoors, or tandoor plus griddle
Sweets (payasam, kheer, halwa)One large vessel (about 25 L)Two 50-portion vesselsTen 50-portion vessels, in sequence
Steamed items (idli, dhokla)Idli steamer racks, stackedTwo steamersSteamer bank; stagger batches
Drinks (coffee, chai, mojito, lassi)One large urn / vessel, plus a pouring stationTwo urnsBeverage station, two or more urns

Sizes are working guidance, not a specification for a particular vessel. A vessel that is too full cooks unevenly and boils over; one that is too empty scorches. Fill a cooking vessel to no more than two-thirds for gravies and rice, and to no more than half for anything that rises or foams (payasam, kheer, dal).

Notes per dish type

Rice (Nos. 23–30, 77–82, 122–125, 152–153, 170, 174)

Rice needs a heavy, flat-bottomed vessel with a tight lid, and a planned resting time. Biryani needs a vessel that seals well enough for dum (slow steaming under a sealed lid) — a loose lid is not a dum vessel. Never cook more than 50 portions of rice in one vessel.

Gravy (Nos. 13, 14, 18, 64–76, 114–121, 145–151, 169, 172–173)

Gravy needs a heavy vessel, a long ladle and a lid. Flavour depends on even cooking, not speed: the oil-separation stage cannot be rushed. Make mother gravies the day before where the recipe allows it, and finish each 50-portion vessel separately. Keep one vessel for vegetarian gravy and one for non-vegetarian — never the same vessel for both.

Tandoor (Nos. 83–91, 96)

Tandoor dishes need a hot, working tandoor, long skewers, a cook who can work it safely, and a plan for the queue: naan and tikka cooked to order are always the slowest part of the buffet. Stagger the work — start breads before mains are served — and keep a griddle as backup. If the venue has no tandoor, do not promise tandoor dishes.

Frying (Nos. 9, 35–40, 92–95, 126–129, 158–161, 34, 58, 59)

Frying needs a deep kadai, a thermometer or the sight-test the recipe gives, a slotted ladle, and a draining rack — never a closed container, which steams fried food soft. Fry in small batches close to service: oil temperature drops when a large batch goes in, so bring it back to temperature between batches. Keep oil strained and labelled; discard oil that smells rancid or smokes at low heat.

Sweets (Nos. 47–52, 101–107, 133–139, 162–164)

Sweets are usually made ahead and portioned before service — portioning controls service speed. Syrup sweets (gulab jamun, jangiri, rasgulla) need wide, shallow vessels for soaking, not deep pots where pieces crush each other. Halwa and kheer need a heavy vessel and constant stirring at the end, when they thicken fast and catch. Keep a reserve batch of the most popular sweet and release it only when the first batch is nearly gone.

Steaming (Nos. 1, 7, 11, 144)

Steamed items need a steamer that holds steam evenly across all racks. Uneven steaming is the commonest fault: the top rack undercooks while the bottom overcooks. Rotate racks halfway where the steamer allows it, and do not open the steamer every few minutes — every opening drops the temperature. Serve fresh in small replenished batches.

Live counters (dosa, appam, parotta, chaat-style starters)

A live counter needs a cook, a heat source, ventilation, space for a queue, and a steady supply of batter or dough. One counter serves about 60–80 guests per hour for dosa; plan a second counter above that, or serve set dosa from the kitchen. Keep chutneys and sambar topped up, and give the counter its own spoons and queue, so it does not block the main buffet line.

What a bulk kitchen needs that a home kitchen does not

  • Weighing and measuring: a scale to at least 10 kg, a jug to at least 2 L, and ladles of known volume (one level 250 ml ladle = one 250 g portion of pongal).
  • Enough vessels: separate vessels, ladles and counters for veg and non-veg; a vessel per gravy, rice and sweet; lids for every service vessel.
  • Holding equipment: covered service vessels or chafing dishes, insulated hot boxes, and a cold store for raita, chutney, salads and cold desserts.
  • Labelling: labels for every vessel (name, number, veg / non-veg, allergens), for every stock and base (type and date), and a service sheet listing allergens per dish.
  • A backup plan: a spare vessel, a spare ladle set, and a second cook for the tandoor or live counter. The dish that fails is usually the one with no backup.
Commercial Production Engine

Apply these principles to your menus

Plug any of our 175 formulations into the AI Food Cost Calculator to automatically compute exact ingredient requirements, fuel, and profit margins.