Chapter 2 — Scaling rules
The whole book is built on one rule: multiply the base 10-portion recipe by 5, 10 or 50. This chapter states the rule, the kg / L rule, the rounding rule, and — most importantly — what does not scale in a straight line.
The 10 / 50 / 100 / 500 rule
Every scaling table in the book is linear multiplication from the base 10-portion quantities:
| Portions | Multiply base by | How to cook it |
|---|---|---|
| 10 | × 1 | The base recipe, as written. |
| 50 | × 5 | One 50-portion vessel, or five 10-portion batches. |
| 100 | × 10 | Two 50-portion vessels. Do not cook 100 portions in one vessel unless the recipe says the vessel can take it. |
| 500 | × 50 | Ten 50-portion vessels, cooked in sequence. Never one 500-portion vessel. |
| Any other count | Count ÷ 10 | Multiply the base by (portions ÷ 10). For 230 portions, multiply by 23 — and cook it as 100 + 100 + 30. |
The 50-portion vessel is the unit of bulk cooking in this book. Almost every recipe is written so that 50 portions fit one standard large vessel. When a recipe says “cook in separate 50-portion vessels”, that is not a suggestion — it is the control that keeps the dish even. A single larger pot cooks the middle differently from the edges, and no amount of stirring fixes it.
The kg / L rule
Any quantity above 1,000 g is shown as kg, and any quantity above 1,000 ml is shown as L. The conversion is exact, not rounded away: 1,250 g is 1.25 kg, 2,500 ml is 2.5 L. Quantities at or below 1,000 stay in g or ml, so a cook weighing on a kitchen scale never has to convert in their head. Pieces (bay leaves, cardamoms, eggs, green chillies by count where the recipe counts them) stay as pieces at every scale.
Worked example from the blueprint (illustrative quantities, showing the rule): raw rice 800 g for 10 portions becomes 4.0 kg for 50, 8.0 kg for 100 and 40.0 kg for 500. Water 900 ml becomes 4.5 L, 9.0 L and 45.0 L. Salt 15 g becomes 75 g, 150 g and 750 g — shown scaled, but always tasted and adjusted (see below).
Rounding — how the book rounds, and how you should
- Weigh, don’t estimate. At 500 portions a 5% error is 25 portions of error. Use a kitchen scale for everything above 100 g and a measuring jug for liquids.
- Round small items to the nearest 0.5 g for the base recipe, and to the nearest 5 g at 50 portions and above. Saffron, cardamom and baking soda scale awkwardly in real life: the book gives the arithmetic figure and the nearest usable figure, and the method tells you to weigh them.
- Round counts up, never down. Bay leaves, cardamoms and eggs: 2 for 10 portions is 10 for 50, 20 for 100 and 100 for 500. If your multiplication gives a fraction of a piece, round up to the next whole piece.
- Round the cost, not the recipe. Cost per portion is shown to two decimal places (for example, Rs. 14.05). Round the final quoted figure, never the ingredient quantities.
What does NOT scale linearly — read this before you multiply
Linear multiplication is arithmetic, not cooking. Five things behave differently as the batch grows, and every recipe in the book flags them where they matter. If you remember nothing else from this chapter, remember this table.
| Does not scale | What happens at scale | What to do instead |
|---|---|---|
| Salt | Salt perception changes with batch size, vessel, water and the salt itself. Salt added in full at the start can keep dal and beans firm, and a batch salted by arithmetic alone is often over- or under-salted. | Add half the scaled salt during cooking and the rest after, tasting as you go. Never scale salt blindly. Taste every vessel separately — two 50-portion vessels from the same recipe can need different salt. |
| Spice and chilli | Heat and pungency do not multiply evenly. Whole spices release flavour more slowly in a large vessel; ground chilli and pepper can turn bitter if the tempering burns in a bigger pan. | Scale to 80% first, then add the remaining 20% after tasting. Temper in small batches — one tempering per 50-portion vessel — and never let pepper, cumin or mustard burn. |
| Water | Evaporation depends on vessel surface, lid and heat, not on portions. A 500-portion pot loses proportionally less water than a 10-portion pot; rice and dal cooked with scaled water alone can turn to soup or to a solid block. | Hold back 10% of the scaled water. Add it hot, a little at a time, until the consistency is right. Never add cold water to hot dal, pongal or khichdi — it makes them clump. |
| Cooking time | A 50-portion vessel does not cook in five times the time of a 10-portion vessel, and a 500-portion vessel does not cook at all. Heat reaches the centre more slowly; the outside can overcook while the inside is raw. | Cook in 50-portion vessels. Allow extra time for the vessel to come to temperature, and judge doneness by the dish (colour, texture, a cut through the thickest piece), not by the clock. |
| Frying and griddle work | Oil temperature drops when a large batch goes in at once, and a crowded kadai or griddle cooks unevenly. Fried items held too long go soft; dosa and parotta go tough. | Fry and griddle in small batches close to service, at the temperature the recipe states. Keep the oil hot between batches. Serve fresh in small replenished batches rather than frying everything at the start. |
Scaling down
The same rule works downwards. For 5 portions, halve the base 10-portion recipe; for 20 portions, double it. Below 5 portions, do not halve the tempering and the whole spices by arithmetic alone — a half teaspoon of mustard seeds in a tiny pan burns in seconds. Use the full small tempering the method describes and adjust the salt by taste. The book is written for bulk cooking; for a home-scale test, cook the 10-portion base and keep the rest for staff meals the same day.
Apply these principles to your menus
Plug any of our 175 formulations into the AI Food Cost Calculator to automatically compute exact ingredient requirements, fuel, and profit margins.